CO2 Sæt 1 ltr. 850 g. Advance

USE INSTRUCTIONS:

1. Connect the CO2 controller and make sure the controller is off.

2. Fill the diffuser with water and place it deep in the aquarium on the glass. Use the supplied suction cup. Use the air hose holder to prevent the hose from bending.

3. Connect the air hose to the diffuser, return valve and controller.

4. Turn on the controller and adjust to the desired CO2 amount.

5. Add 1 ml of permanent liquid to the CO2 indicator and replace the liquid every month.

6. After 24 hours, the diffuser can be expected to run optimally.

Important: The diffuser is immersed in water for approx. 2 hours before use for optimal use.